THE HOT TUB WIZARD-CD
THE HOT TUB WIZARD-CD
Designed to run on mild salt water (1500-2000ppm) vs (2-3000ppm) required by other systems which can be corrosive. Built In Chlorine Detection to help prevent over chlorination.
Not sure which cell fits your system? Call or text.
Call or Text (844) 468-8828Introducing our new The Hot Tub Wizard®-CD
- Designed to run on mild salt salt water (1500-2000ppm) vs (2-3000ppm) required by other systems which can be corrosive
- Built In Chlorine Detection to help prevent over chlorination.
- Improved CD sensor for longer life
- Quick Connect makes cell service and replacement a breeze
- power supply with spa pack power pigtail for easy installation. No dedicated outlet needed.
- 3.5' & 7' Cell cable option
- Enclosure vent to help protect electronics
- 2 year limited warranty
- Inline option available -ONLY FOR USE WITH 24 HOUR CIRCULATION- images in listing.
- Similar to the Saltron Mini with advanced algorithms and chlorine detection.
Spec Sheets
Hot Tub Wizard Specs
- Warranty
- 2YEAR
- Satisfaction guarantee
- 60DAY
- Mild salt range vs 2-3000 ppm required by other systems
- 1500-2000PPM
- Built in chlorine detection, quick connect cell and USB power supply
- CD
Fit Notes
-
Converts most regular hot tubs. Ask us what your tub needs.
-
Keep hardness 250-350 ppm with balanced pH.
-
Quick connect cell, no taking the box apart.
-
Salt level around 1,500 ppm.
Buy Factory Direct
Buy from the manufacturer: real parts, warranty honored here, support from the people who make it.
- Buy Factory Direct
- Support from the people who make it
Real Owner Feedback
Owners Say
Warranty and Guarantee
1 year warranty on the control and 18 month warranty on the salt cell, plus a 60 day satisfaction guarantee.
If you aren't happy and actually enjoying your hot tub, simply let me know and send it back for a full refund. You have 60 days.
Questions
The controller keeps repeating its startup light sequence.
This is usually caused by a faulty power supply, but it could also potentially be due to a short circuit in the electrode hardware. Replace the power supply with one that has the same output. This should be 5.0V-2.4A for The Hot Tub Wizard and The Hot Tub Wizard-CD. If the problem persists, replace the electrode cell.
Consistent low salt indicator, despite the salt level being correct.
This could be a hardware issue with either the power supply or the electrode. The power supply might be nearly dead or otherwise outputting a lower voltage than it should. You might still see a few bubbles coming from the electrode in the water in this case. Otherwise, the electrode may be faulty or simply out of life. Test the output of the power supply using a multimeter. If the output is correct, then the electrode is likely the problem.
Can I convert a regular hot tub to saltwater?
Most traditional tubs can be converted to saltwater, though some may need new equipment, such as a salt system, depending on the tub. Standard components do best with balanced water, and many salt ready tubs use titanium components. Hardness is commonly kept in the 250 to 350 ppm range. See Saltwater Hot Tub Conversion.
My system makes too much or too little chlorine.
If your system maintains chlorine levels above 5 ppm lower your output level. If your chlorine is under 2 ppm raise the output level. Change in output level should be done 1 unit at a time until you reach a level between 2 and 5.
